The P663H-51 is a router-based CPE, whose purpose is to co-work with IES series DSLAM to provide ADSL2+ bonding solution for areas where more bandwidth is required, but VDSL solution is not feasible.
ZyXEL MSAN/IP DSLAM already provided the ADSL2+ bonding feature. In order to have the CPE paired solution, P-663H-51 4 LAN port CPE router is developed.

Key features

– Support ADSL2+ two port bonding features (G.998.1)
– 4-port CPE Router
– Support ADSL Layer Features including
– ADSL2/2+, Annex L and Annex M
– Support DELT (dual ended loop test)
– Seamless Rate adaptation (SRA)
– Dying Gasp

Provide an end-to-end solution for ADSL2+ bonding feature.
With the introduction of P-663H-51, ZyXEL provides a complete solution for ADSL2+ bonding. This new feature allows to electronically "bond" several ADSL2/ADSL2+ links using cooper phone lines, in order to increase badnwidth and achieve high data rates.

Provide a better throughput performance than traditional ADSL2+ modem
By compared with traditional ADSL2+ ATU-R, ADSL2+ bonding feature can provider higher badnwidth for service providers through two physical copper lines. This is extremely useful for apllications demanding high data rate such as HDTV. For examples, two of ADSL2+ can be bonded to double the data rate on show distances (<1.5km) up to 44Mbps, or long distances (<3.6km) up to 8Mbps.

Comply all standard ADSL2/ADSL2+ features
In additional to deliver great data rates over greater distance than the basic ADSL2/ADSL2+, P-663H-51 still supports traditional ADSL2+ standard, such as Annex L, Annex M, DELT, SRA and dying gasp functions.

Benefits:

– Higher-speed Broadband Access
With the introduction of P-663H-51, ZyXEL provides a complete solution for ADSL2+ bonding. This new feature allows to electronically "bond" 2 pairs of ADSL2/ADSL2+ links using cooper phone lines, in order to increase bandwidth and achieve high data rates.

– Compliant all standard ADSL2/ADSL2+ features
In additional to deliver great data rates over greater distance than the basic ADSL2/ADSL2+, P-663H-51 still supports traditional ADSL2+ standard, such as Annex L, Annex M, DELT, SRA and dying gasp functions.

– Robust, State-of-the-Art IP Security
The P-663H-51 supports state-of-the-art Firewall features, Stateful Packet Inspection, anti-DoS (Denial of Service) and IP/MAC address spoofing protection for basic defense against hackers, network intruders and other hazardous threats.

– Sophisticated QoS for Triple-Play Services
The P-663H-51 comes with complete ATM and Ethernet QoS mechanisms, as well as various IP QoS features (Packet classification/Rate Limitation/Queue Scheduling). The seamless QoS-mapping not only allows consistent and appropriate traffic treatment of packets, but also enables fulfillment of triple-play services. The IGMP proxy/snooping and fast leave (v1, v2) features also supports the IP multicasting service.

Specification:

– ADSL Layer Features:
– ADSL2/2+, Annex L and Annex M
– Support DELT (dual ended loop test)
– Seamless Rate adaptation (SRA)
– Dying Gasp

• ATM Layer Features:
Multiple PVC support
RFC1483/2684 multiple protocol over AAL5

• RFC2516 PPPoE
VC and LLC Multiplexing
Traffic Shaping UBR, CBR, VBR-nrt
OAM F4/F5 end-to-end loopback
ATM-based Multi-Pair Bonding (G.998.1) support

• Security Features:
Three level management login
WAN & LAN Service access control
Service access control based on source IP address
Anti-Denial of Service, SYNC flooding, IP Smurfing, Ping of Death, Fraggle,Teardrop, LandAnti-port scanning

• TCP/IP/port/Interface filtering rules, Protect against IP and MAC address spoofing
Stateful Packet Inspection

• Logging Features:
User selectable levels
Local display and/or send to remote syslog server
ADSL up/down, PPP up/down
Intrusion alert
Primary DNS server status monitor
XML config file failures

• Network Protocols:
IP routing : TCP, UDP, ICMP, ARP
VPN (IPSec, PPTP, L2TP) pass-through *
DHCP Server/Relay/Client
RADIUS client
DNS rely/proxy
Dynamic DNS
RIP/RIP v2 routing functions
NAT/PAT/NAPT
o IGMP Proxy/snooping and fast leave (v1, v2 and v3)
o IP QoS
o UPnP IGD 1.0

• Ethernet L2 Features:
Default Bridging for user traffic
ARP
802.1Q Tag-Based VLAN
802.1P CoS with priority queuing

• Hardware Specification?
Power input & Power consumption: 12VDC (1.5A), 15 watt
Power Adaptor: Input : 100~ 240VAC, 0.5A, 50~60Hz, 40~60VA, Output : 12VDC, 1.5A, 18W
LAN: 4-Port RJ-45 connectors for 10/100Mbps with Auto MDI/MDIX. Support both Half and Full Duplex.
ADSL : one RJ-11 connector for 2 ADSL2+ ports.

Physical Specification?
o Dimension: 205(W)x 145(D)x 32(H)mm

• Certification?
RoHS & WEEE

– Safety
UL1950
CSA C22.2 No. 950
EMC
FCC Part 15 & Part 68Class B